Contact information

CMG Power Ltd
Cardiff Marine Village
Penarth Road
Cardiff GB
CF11 8TU

Phone: +44 (0)2920787187
Fax: +44 (0)2920787188

Mail: websales@cmgpower.com
Web:
www.cmgpower.com

Transmission system

Flexible propeller shaft coupling A flexible propeller shaft coupling must be used when the propeller shaft is rigidly mounted and the engine is suspended on rubber mountings. The coup...	Propeller shaft coupling with clamp The coupling has an in-built coupling clamp which considerably simplifies shaft installation. It makes it possible to cut the propeller shaft to the r...
Propeller shaft coupling with tapered locking pin and keyway Conventional propeller shaft. Supplied with nuts, bolts and locking pin.	Lock washer for propeller shaft nuts <b class="bold"><br />Note:</b> V9338 = Week 38, year 1993.
Complete propeller shaft Supplied with washer, nut and wedge according to ISO Standard. Material SIS 2324. Propeller shaft tolerance h9 (+0.0–0.052).	Shaft sleeve The shaft sleeve is adapted for use with Volvo Penta’s rubber packing box. The sleeve is threaded 200 mm at one end in order to fit to Volvo Penta’s s...
Clamp attachment For attaching shaft sleeve	Key for older shafts A new key is now available for older types of shaft with a 10 mm key slot to make them suitable for new ISO standard bronze propellers.
Stern bearing for plastic bonding Stern bearing with replaceable water-lubricated rubber bearing. Ribbed surface for secure bonding.	Stern bearing for bolting Stern bearing for bolting into wooden or fibre glass hulls. Replaceable water-lubricated rubber bearing. Attached with M8 bolts.
Rubber bearing Water-lubricated rubber bearing for stern and support bearings.	Rubber packing box Moulded packing box for effective lubrication/sealing. Simple, time saving installation and compact size. Minimal maintenance work – grease every 200 ...
Packing box Conventional and effective propeller shaft lubrication/sealing. Supplied complete with hose and hose clips. A greaser 827184 can be connected (include...	Greaser Separate greaser for simple filling of packing boxes. Can be connected to Volvo Penta conventional packing boxes (included with 40 and 45 mm packing b...
Greaser hose Length 1 m. Fits to greaser 827184 (included with 40 and 45 mm packing boxes).	Trolling valve For installation on the hydraulically operated reverse gear units. Permits a lower speed than is otherwise possible, for example when sport fishing. T...
Control cable bracket, horizontal Required for HS reverse gear units older than model year 99.	In trim limiter - DP-S drive For aluminium propellers. For drives from model year 1998.<br/>
Kit for limitation of tilt angle Mechanical Power Trim limitation. Used in installations with a low aft swimming platform, for example. Gives a tilt angle of 32°. For SX/DP-S drives.	Kit for limitation of tilt angle Used in installations with a low aft swimming platform, for example. Gives a tilt angle of 42°. For SX/DP-S drives.
Drive extension for S drives For the installation of S drives in vessels with a deeper hull form.	Drive extension for AQ drives For installations that reqire a longer drive to ensure improved propeller "grip" and thereby reduce cavitation.
Active Corrosion Protection The Active Corrosion Protection helps prevent galvanic corrosion from attacking the metal parts of your drive. This system complements the existing sa...	Aquamatic adapter plate Complete adapter kit for replacing older Volvo Penta drives with SX or DP-S drives.
Active Corrosion Protection System The QL Active Corrosion Protection System helps prevent galvanic corrosion from attacking the metal parts of your sterndrive or outboard. This system ...