Contact information

Motortech Marine Engineering

3-5 The Slipway. Port Solent.
Portsmouth. Hampshire.
PO6 4TR

Tel: +44 (0) 23 92201171
Fax: +44 (0) 23 92201172

E-mail: Motortechmarine

Instruments

Instruments for EVC engines The Volvo Penta line of instruments is designed to match all EVC (Electronic Vessel Control) diesel and gasoline engines. This results in a new level ...	Clocks Volvo Penta instruments are specially adapted for marine operations in corrosion-resistant materials, both sealed and fitted with built-in lighting. T...
Front ring for 52 mm instruments Circular instrument fitting for instruments with a diameter of 52 mm. <br />Required hole diameter 60 mm.	Front ring for 72 mm instruments Circular instrument fitting for instruments with a diameter of 72 mm. <br />Required hole diameter 90 mm.
Square instrument frame for 52 mm instruments Square instrument frame for instruments with a diameter of 52 mm. <br />External dimensions: 62.5 x 62.5 mm. <br />Required hole diameter 52 mm.	Square instrument frame for 72 mm instruments Square instrument frame for instruments with a diameter of 72 mm. <br />External dimensions: 93.7 x 93.7 mm. <br />Required hole diameter 72 mm.
Toggle switch	Holder for 52 mm instruments For one instrument.
Holder for 72 mm instruments For one instrument.	Instrument panel, standard For either Main control position or Flybridge installation.
Instrument panel, standard Intended for either Main control position or Flybridge installation.	Instrument panel, De Luxe Intended for either Main control position or Flybridge installation.
Sensor kit for instrument panel, De Luxe Only for MD2010, MD2020, MD2030 and MD2040.	Cover plate To cover the tachometer opening in the instrument panel should a tachometer not be installed.
Flipped Flybridge instrument panel, De Luxe Excluding instruments, lamps and switches. The same design and dimensions as 3587074 but in reversed image.	Alarm panel display Used when alarm functions are moved from the instrument panel and separately installed. The panel contains symbols for coolant temperature, oil pressu...
Instrument installation kit, diesel engines For custom designed instrument panels intended for either Main control position or Flybridge installation, 4 instruments.	Instrument kit, diesel engines For custom designed instrument panels intended for either Main control position or Flybridge installation.
Instrument installation kit, diesel engines For custom designed instrument panels intended for either Main control position or Flybridge installation. One instrument.	Instrument kit, petrol engines Intended for either Main control position or Flybridge installation.
Instrument kit with tachometer, gas engines <b>Includes:</b><br/>Tachometer part no. 3855604<br/>Coolant temperature gauge part no. 856811<br/>Oil pressure gauge part no. 856812<br/>Voltmeter pa...	Tachometer kit, diesel engines Also includes operating clock. Suitable for both standard and De Luxe instrument panels 873594, 3587077, 3587074, 860184 and instrument installation k...
Sensor, engine coolant temperature Intended for use with double instrumentation and replaces the standard sensor.	Sensor, engine oil pressure Intended for use with double instrumentation and replaces the standard sensor.
Digital Power Trim instrument kit For Flybridge installation. Equipped with display showing the trim angle of the drive. Control unit 3855650 is suitable to operate the Power Trim. <br...	Power Trim control unit For custom made Power Trim control units: <br/>Push-button switch for by-pass, part no. 828718.<br/>Toggle switch, part no. 814322. <br/>Rubber seal f...
Analog Power Trim instrument For DPX drive. Shows the drive trim angle. Control unit 3855650 is suitable to operate the Power Trim.	Analog Power Trim instrument kit
Control unit for 873136 For Flybridge installations, extension cables 856821 and 853066 are required. These must be ordered separately. Two relays (1324492) are also required...	Fuel gauge, kit The fuel gauge shows the quantity of fuel in the fuel tank – an important function for marine safety. The sensor, which is installed in the fuel tank,...
Fresh water gauge, kit The gauge shows the water level in the fresh water tank. The sensor, which is installed in the tank, is equipped with a float that follows the level o...	Rudder indicator, kit The indicator shows the angle of the rudder and is an invaluable aid when manoeuvring and mooring in crowded harbours.
Rudder indicator, kit for drives, 12 V The indicator shows the drive angle and is an invaluable aid when manoeuvring and mooring in crowded harbours. Complete kit for connection of sensor t...	Rudder indicator, instrument, 24 V Including mounting bracket but excluding front ring. Front ring, see 858643.
Y-connector for Flybridge, diesel For the connection of the Flybridge instrument panel to the existing main instrument panel. The connector has 16-pole snap on connectors.	Extension cables Both ends of the extension cables are equipped with snap-on connectors which fit directly between the engine cables and the instrument panel.
Diode cable, diesel Required for pre-heater and stop function on certain installations.	Y connector for Power Trim - Flybridge
Extension cable for Power Trim instrument kit 872239 Length 3 m.	Extension cable for Power Trim
Water Alarm Suitable for use in conjunction with fuel filters/water separators 877762, 877769, 877768, 877770, 877763, 877771, 889280. By means of a warning lamp ...	Start lock kit, two locks For dual control stations and single engine installations or single control station and twin engine installation.<br/>
Start lock kit, four locks For dual control station and twin engine installations.	Start lock kit, two locks