
Filter Catalogues by Service Areas:
Exhaust system Engine accessories
Complete systems with silencers, hoses, elbows and everything else needed. Perfectly in tune with the respective engine series.
The water-cooled system has a number of advantages:
• Low exhaust pipe temperature allows the use of rubber hoses.
• Extremely effective silencing of exhaust noises.
• Compact size and low weight.
![]() Rubber exhaust hoses
An extremely flexible exhaust hose for marine wet exhaust systems that conforms with ISO13363 type 2 (+580°C) and SAE J 2006 type R2. It's minimized b...
|
![]() Elbow coupling, wet exhaust systems
The elbow coupling provides an improved installation and reduces the risk of a kink forming in the exhaust hose.
|
![]() Silencer, wet exhaust systems
The silencer effectively silences engine exhaust noise with a minimum of back pressure. The silencer also functions as an effective water-lock. Its la...
|
![]() Through-hull exhaust fitting
Through-hull exhaust fitting with drip-edge to prevent cooling
water from discolouring the side of the hull. With pre-formed
collar for hose connectio...
|
![]() Exhaust riser
An exhaust riser raises the level of the exhaust elbow. This is
installed on vessels with engine installations at or below the
water line. The riser r...
|
![]() Exhaust temperature alarm, wet exhaust systems
The temperature alarm sensor is installed in the exhaust hose and transmits a signal to a warning lamp in the event of excessive exhaust temperatures ...
|
![]() Exhaust cover kit
In order to comply with strict regional noise limitation requirements, Volvo Penta has developed exhaust cover kits for shields and drives. The kits a...
|
![]() Exhaust block-off kit
The standard exhaust fitting for I/O-engines leads the exhaust
through the drive. If a separate silencer is required, then the
exhaust port in the tra...
|