Instruments Mechanical Controls & Instruments
![]() Clocks
Volvo Penta instruments are specially adapted for marine operations in corrosion-resistant materials, both sealed and fitted with built-in lighting. T...
|
![]() Front ring for 52 mm instruments
Circular instrument fitting for instruments with a diameter of
52 mm.
Required hole diameter 60 mm.
|
![]() Front ring for 72 mm instruments
Circular instrument fitting for instruments with a diameter of
72 mm.
Required hole diameter 90 mm.
|
![]() Square instrument frame for 52 mm instruments
Square instrument frame for instruments with a diameter of 52
mm.
External dimensions: 62.5 x 62.5 mm.
Required hole diameter 52 mm.
|
![]() Square instrument frame for 72 mm instruments
Square instrument frame for instruments with a diameter of 72
mm.
External dimensions: 93.7 x 93.7 mm.
Required hole diameter 72 mm.
|
![]() Toggle switch
|
![]() Holder for 52 mm instruments
For one instrument.
|
![]() Holder for 72 mm instruments
For one instrument.
|
![]() Instrument panel, standard
For either Main control position or Flybridge installation.
|
![]() Instrument panel, standard
Intended for either Main control position or Flybridge
installation.
|
![]() Instrument panel, De Luxe
Intended for either Main control position or Flybridge
installation.
|
![]() Sensor kit for instrument panel, De Luxe
Only for MD2010, MD2020, MD2030 and MD2040.
|
![]() Cover plate
To cover the tachometer opening in the instrument panel should a tachometer not be installed.
|
![]() Flipped Flybridge instrument panel, De Luxe
Excluding instruments, lamps and switches. The same design and dimensions as 3587074 but in reversed image.
|
![]() Alarm panel display
Used when alarm functions are moved from the instrument panel and separately installed. The panel contains symbols for coolant temperature, oil pressu...
|
![]() Instrument kit, diesel engines
For custom designed instrument panels intended for either Main
control position or Flybridge installation.
|
![]() Instrument installation kit, diesel engines
For custom designed instrument panels intended for either Main
control position or Flybridge installation. One instrument.
|
![]() Instrument kit with tachometer, gas engines
Includes:Tachometer part no. 3855604Coolant temperature gauge part no. 856811Oil pressure gauge part no. 856812Voltmeter part no. 873199
|
![]() Tachometer kit, diesel engines
Also includes operating clock. Suitable for both standard and De Luxe instrument panels 873594, 3587077, 3587074, 860184 and instrument installation k...
|
![]() Sensor, engine coolant temperature
Intended for use with double instrumentation and replaces the standard sensor.
|
![]() Sensor, engine oil pressure
Intended for use with double instrumentation and replaces the standard sensor.
|
![]() Digital Power Trim instrument kit
For Flybridge installation. Equipped with display showing the trim angle of the drive. Control unit 3855650 is suitable to operate the Power Trim.
|
![]() Power Trim control unit
For custom made Power Trim control units: Push-button switch for by-pass, part no. 828718.Toggle switch, part no. 814322. Rubber seal for toggle switc...
|
![]() Analog Power Trim instrument
For DPX drive. Shows the drive trim angle. Control unit 3855650 is suitable to operate the Power Trim.
|
![]() Analog Power Trim instrument kit
|
![]() Control unit for 873136
For Flybridge installations, extension cables 856821 and 853066 are required. These must be ordered separately. Two relays (1324492) are also required...
|
![]() Fuel gauge, kit
The fuel gauge shows the quantity of fuel in the fuel tank – an
important function for marine safety. The sensor, which is
installed in the fuel tank,...
|
![]() Fresh water gauge, kit
The gauge shows the water level in the fresh water tank. The sensor, which is installed in the tank, is equipped with a float that follows the level o...
|
![]() Rudder indicator, kit
The indicator shows the angle of the rudder and is an invaluable
aid when manoeuvring and mooring in crowded harbours.
|
![]() Rudder indicator, kit for drives, 12 V
The indicator shows the drive angle and is an invaluable aid when manoeuvring and mooring in crowded harbours. Complete kit for connection of sensor t...
|
![]() Rudder indicator, instrument, 24 V
Including mounting bracket but excluding front ring. Front ring,
see 858643.
|
![]() Y-connector for Flybridge, diesel
For the connection of the Flybridge instrument panel to the existing main instrument panel. The connector has 16-pole snap on connectors.
|
![]() Extension cables
Both ends of the extension cables are equipped with snap-on connectors which fit directly between the engine cables and the instrument panel.
|
![]() Diode cable, diesel
Required for pre-heater and stop function on certain installations.
|
![]() Y connector for Power Trim - Flybridge
|
![]() Extension cable for Power Trim instrument kit 872239
Length 3 m.
|
![]() Extension cable for Power Trim
|
![]() Start lock kit, two locks
For dual control stations and single engine installations or single control station and twin engine installation.
|
![]() Start lock kit, four locks
For dual control station and twin engine installations.
|
![]() Start lock kit, two locks
Fits EVC engines.
|