Informações sobre Cookies e obter concordância do utilizador para esta página da internet

Utilizamos os cookies para nos assegurarmos que lhe oferecemos a melhor experiência na nossa página da internet. Se continuar sem alterar as suas definições, vamos assumir que está satisfeito por receber todos os cookies da página da internet da Volvo. Pode no entanto, alterar as suas definições de cookies em qualquer altura. Por favor ter em atenção que se alterar as suas definições de cookies, não vamos poder garantir que a nossa página da internet funcione adequadamente. A página pode perder algumas funções e vai perder o acesso a algumas páginas. Para ler mais sobre cookies, ver o nosso Declaração de Cookies.

Aceite
Aplicar filtro de catálogo por: ou Eliminar
Filter Catalogues by Service Areas:

Ir para: Ir para:

Transmission system Engine accessories

Accessories for inboard applications specially developed for Volvo Penta engines and reverse gears.
 
Flexible propeller shaft coupling
Flexible propeller shaft coupling
A flexible propeller shaft coupling must be used when the propeller shaft is rigidly mounted and the engine is suspended on rubber mountings. The coup...
Propeller shaft coupling
Propeller shaft coupling
The Volvo Penta two-piece rigid propeller shaft coupling is designed to make installation much easier and less time consuming. It requires no costly m...
Propeller shaft coupling with taper..
Propeller shaft coupling with tapered locking pin and keyway
Conventional propeller shaft. Supplied with nuts, bolts and locking pin.
Lock washer for propeller shaft nuts
Lock washer for propeller shaft nuts
Note: V9338 = Week 38, year 1993.
Complete propeller shaft
Complete propeller shaft
Supplied with washer, nut and wedge according to ISO Standard. Material SIS 2324. Propeller shaft tolerance h9 (+0.0–0.052).
Shaft sleeve
Shaft sleeve
The shaft sleeve is adapted for use with Volvo Penta’s rubber packing box. The sleeve is threaded 200 mm at one end in order to fit to Volvo Penta’s s...
Clamp attachment
Clamp attachment
For attaching shaft sleeve
Key for older shafts
Key for older shafts
A new key is now available for older types of shaft with a 10 mm key slot to make them suitable for new ISO standard bronze propellers.
Stern bearing for plastic bonding
Stern bearing for plastic bonding
Stern bearing with replaceable water-lubricated rubber bearing. Ribbed surface for secure bonding.
Stern bearing for bolting
Stern bearing for bolting
Stern bearing for bolting into wooden or fibre glass hulls. Replaceable water-lubricated rubber bearing. Attached with M8 bolts.
Rubber bearing
Rubber bearing
Water-lubricated rubber bearing for stern and support bearings.
Rubber packing box
Rubber packing box
Moulded packing box for effective lubrication/sealing. Simple, time saving installation and compact size. Minimal maintenance work – grease every 200 ...
Packing box
Packing box
Conventional and effective propeller shaft lubrication/sealing. Supplied complete with hose and hose clips. A greaser 827184 can be connected (include...
Greaser
Greaser
Separate greaser for simple filling of packing boxes. Can be connected to Volvo Penta conventional packing boxes (included with 40 and 45 mm packing b...
Greaser hose
Greaser hose
Length 1 m. Fits to greaser 827184 (included with 40 and 45 mm packing boxes).
Trolling valve
Trolling valve
For installation on the hydraulically operated reverse gear units. Permits a lower speed than is otherwise possible, for example when sport fishing. T...
Control cable bracket, horizontal
Control cable bracket, horizontal
Required for HS reverse gear units older than model year 99.
In trim limiter - DP-S drive
In trim limiter - DP-S drive
For aluminium propellers. For drives from model year 1998.
Kit for limitation of tilt angle 32°
Kit for limitation of tilt angle 32°
Mechanical Power Trim limitation. Used in installations with a low aft swimming platform, for example. Gives a tilt angle of 32°. For SX/DP-S drives.
Kit for limitation of tilt angle 42°
Kit for limitation of tilt angle 42°
Used in installations with a low aft swimming platform, for example. Gives a tilt angle of 42°. For SX/DP-S drives.
Drive extension for S drives
Drive extension for S drives
For the installation of S drives in vessels with a deeper hull form.
Drive extension for AQ drives
Drive extension for AQ drives
For installations that reqire a longer drive to ensure improved propeller "grip" and thereby reduce cavitation.